Quick Sign In:  

Forum: General Discussion

Topic: [NEW VERSION] VirtualDJ Pro v5.1 - Page: 15

This part of topic is old and might contain outdated or incorrect information

FLeX69PRO InfinityMember since 2006
How can I say this........I luv it...I luv it...I luv it...Thank You Devel. Team

First, I have an old Dell for a few years, 1G CPU, 1G RAM with my MKII on W2K Pro. Even though I have my comments and suggestions, I was always impress with VDJ to work on any computer and perform almost flawlessly on mine. This is one of my reasons to purchased VDJ.

I put it to the test last night:

* Able to perform more finer tuning with the EQ's (before it was jumping in small increments with the MKII)...solved

* Awesome on the smart-tap & smart play (smart tap assist to create jingles/loops quickly and in sync)

* The new skin "HE5" doesn't use much CPU resources...Great job...It doesn't look 'busy'

* Awesome display to include key, bpm, db, time, & wave. The wave display (HE5) seems to have more details...confused when looking at the BPMs, but remember I used it last night for the first time...It is user friendly

* I did have to re-scan my playlist to get the keys and bpm...not a big deal...I was excited to use it right away

* I visited websites to learn music keys, instead of using mixed in key terminology, ex. 9A, 7A...anybody wants to buy MIK?

* VDJ has definitely improved on the product (One software to take care of most DJ's needs).

Thanks again.
 

Posted Sat 07 Jun 08 @ 8:13 am
taylaPRO InfinityMember since 2007
well i said thanks way back on page one and i would just like to reiterate that sentiment, friday morning installed 5.1 on the gig lappy ready for that nights gig and waited in anticipation to see how the new rmx update would fair as i have been having audio problems with this unit. now all i can say is a great big well done audio and video worked perfectly all night for six hours can't want for more than that.

but, there's always a but, when activating the clipbank the audio started to jump, would you have any ideas what may be causing this and if so could you advise.

thanks again for your time and efforts guys, great job well done.


Tayla

 

Posted Sat 07 Jun 08 @ 8:48 am
My 5.1 feed back,
___________________________________________________________________________
FAME engine:
- new BPM engine with more than 99.9% of correct detections
what was wrong with the old one, do we need to analyze them all over again?? and obviously, it's not going to be written to it's id3 info.
isn't this like the 100'th update/upgrade. what ever you wana call it? ok, i got it. bpm, the one from 3.2 was also perfect.
___________________________________________________________________________
- new automatic Key detection
this is the future. along with "Camelot" , lancerlot, and king arthur.
___________________________________________________________________________
- optional automatic Key-Match
how?? please tell me.. How??
___________________________________________________________________________
- new auto-gain engine
didn't we already have this?
i think this is the root of song pos height problem.
it seems to cause volume to change during playback, and that definitely sucks.
analyze, suggest, but don't just change the volume during playback.
___________________________________________________________________________
Video:
- video session recording
long awaited.. good job
___________________________________________________________________________
- fade to black on level sliders
definitely good.
___________________________________________________________________________
Automix:
- display both playing and coming waveform in songpos graphic
i say no on this one, because there is nothing i can do about it. consider bringing back the dualdeck automix. it is requested by many many many many users.. hint hint. many users.
___________________________________________________________________________
- can move mixpoints on the fly during automix
definatley a plus, but how exactly do we do this??
please tell me. i want to know.
this feature is a highlight of mixmeister.
___________________________________________________________________________
Timecode:
not my field, but should be great for the community
___________________________________________________________________________
External devices:
should be great for the community
___________________________________________________________________________
New functions:
- smart beat-tap (automatically snap tapped beat to the nearest likely bpm)
- smart play (play directly on beat)
- smart cue (hotcue always in the tempo)
i think this requires a new skin. or actually just make the current play button and cue button be a smart play and smart cue.
___________________________________________________________________________
Skin:
- new skin "HE5" featuring all the new functions of v5.1
where is it? config> skin> ??, looked everywhere, couldn't find it..
___________________________________________________________________________
Small Improvements:
should be great for the community
___________________________________________________________________________
Bug fixes:
should be great for the community
now would this include the 'force logo if no logo specified'? ;) still makes me laugh. priority indeed.
 

Posted Sat 07 Jun 08 @ 9:02 pm
taylaPRO InfinityMember since 2007
djkz, shut the fcuk up, evidently there is some bug up your ar$e tonight or something your using that i'm not, do yourselve a favour switch the computer off and go to sleep, your going to regret a lot what you read when you come round...

Tayla

 

Posted Sat 07 Jun 08 @ 9:12 pm
deranged narcissism....always welcome here!
 

Posted Sat 07 Jun 08 @ 10:03 pm
SBDJPRO Infinity Member since 2006
People were always complaining the BPM engine wasn't accurate enough. Atomix improve it, someone complains the old one was good enough. Unbelievable.

The autogain has been improved for the 5.1 release - I've not had any problems with the songs changing volume during playback (unless they are supposed to of course) so you might want to check your settings, and also check you are not playing a file before it's fully loaded.

I never use automix, but I believe moving the mixpoints on an automix can be done by simply dragging the points in the waveform view.

The new skin is definately there, you just need to look. No-one else has had any problems finding it as far as I know ;)
 

Posted Sat 07 Jun 08 @ 10:05 pm
Tear Em 'UpPRO InfinitySenior ModeratorMember since 2006
tayla wrote :
djkz, shut the fcuk up, evidently there is some bug up your ar$e tonight or something your using that i'm not, do yourselve a favour switch the computer off and go to sleep, your going to regret a lot what you read when you come round...

Tayla



Well, lets look at this logically shall we? He posted all of this at around 7:00 p.m. west coast US time...sorry 1900. So the odds of him being totally wasted are 50-50. So if we give him the benefit of the doubt that he was sober we have to conclude he was only trying to help. However, the comment about the logo is a long standing ATOMIX regulation, so it is off limits for all of us to comment on.

The BPM engine update was sorely needed if you mixed hip hop, or something besides house.

Camalot is a Key detection system, see here, and is used by a great many very skilled mixers. So for many of us it is a welcome addition.

If you do not like the auto gain it can be turned off, as is mine, by simply disabling it.

The Auto mix is not going to change in foreseeable future, this is a dead topic, please move along, nothing to see here.

The new skin is called VirtualDJ_5.2, it is also available in 1024X768 in the skin menu, please look again. (side note: it also shows the Key the present song loaded on the decks is in, which is useful if you do in fact mix in key)

Well, I hope that coves it....peace and hair grease....T
 

Posted Sat 07 Jun 08 @ 10:25 pm
bike245Home userMember since 2008
For some reason i have the folder video not showing the files no more...

anyone had that issue?

and know how to fix it?
 

Posted Sat 07 Jun 08 @ 11:41 pm
DJ CyderPRO InfinitySenior staffMember since 2003
well if you disabled the video engine, that would make sense.
 

Posted Sat 07 Jun 08 @ 11:45 pm
DazmaxPRO InfinityMember since 2007
Sorry guys ! Been so busy playing I forgot to thank cstol for his help with the download. Thanks.

Daz.
 

Posted Sun 08 Jun 08 @ 12:39 am
3 days ago I loaded VDJ 5.1 onto my Mobile Rack system (see blog for pic those interested.) And last night I did a Wedding Reception with Video display (again See Blog for pics of video display truss)

VDJ absolutely AMAZED my Clients.

They Emailed my some pictures of they're wedding in the Dominican Republic, I slammed them into windows movie maker and made a slideshow in about 10 minutes. Played the slideshow in Clipbank while playing the music in automix in VDJ. The Maid of Honour didn't email me a song selection - so I only had a silent movie file after I was finished with movie maker.

I saw faces Drop with amazement when they walked in and saw "cangratulations....." written in text on the screen, The older crowd stayed much later than they normally do - While they weren't dancing because of advanced age - they were watching the music videos

But wait there's more........

The biggest Hit of the night - was the CAMERA PLUGIN

I use VISTA home premium on my mobile unit. so I bought this box:
http://www.tigerdirect.ca/applications/SearchTools/item-details.asp?EdpNo=3427256&CatId=1428

It's vista compliant, I loaded the software and attached a run of the mill 200.00 Sony Handycam to the RCA/Composite input.

Worked directly out of the box.

What a software. Simply Incredible to think that this level of service can be offered to a Client, because of a choice in software solutions.

Am I ever glad I didn't buy PCDJ like I was planning to. I'm a rack DJ so Serato didn't even enter into the Equation.
 

Posted Sun 08 Jun 08 @ 11:45 pm
hey i have just purchased the virtual vinyl box and i am the numark cue 5.0.7, when do u think the version 5.1 will be available for Cue?
 

Posted Mon 09 Jun 08 @ 7:58 am
djcelPRO InfinityModeratorMember since 2004
lhermot wrote :
hey i have just purchased the virtual vinyl box and i am the numark cue 5.0.7, when do u think the version 5.1 will be available for Cue?

Hi, please write your serial number in your profile.
 

Posted Mon 09 Jun 08 @ 8:12 am
tayla wrote :
djkz, ... , evidently there is some bug up your ar$e tonight or something your using that i'm not, do yourselve a favour switch the computer off and go to sleep, your going to regret a lot what you read when you come round...

Tayla



First line reads "My feedback"

I figured the dev team might be interested in what i have to say.

Though i am curious to know why aren't the moderators moderating your reply??

Helllllllloooooooooooooo, any moderators reading Tayla's comment?? Or is this a user with certain privileges we may not discuss?
 

Posted Mon 09 Jun 08 @ 7:59 pm
Tear Em 'UpPRO InfinitySenior ModeratorMember since 2006
djkz wrote :
any moderators reading Tayla's comment?? Or is this a user with certain privileges we may not discuss?


Yes it has been read, and we are told to only moderate in the most extreme circumstances. In answer too your question, no, he has no extra-ordinary privileges.
 

Posted Mon 09 Jun 08 @ 8:46 pm
Well gentlemen what can I say... (Apart from I hate seeing people bickering in forums - soooo childish!!)

What I wanted to say was THANK YOU TEAM!! This product is seriously a professional tool now!! Up until the last update I was considering purchasing Serato but now I'm not!!

You've done us proud - keep up the good work!!!
 

Posted Tue 10 Jun 08 @ 3:35 pm
Marph84PRO InfinityMember since 2006
I've got problems with the new Timecode Engine.

When i play 2 songs having the same bpm the songs run away very fast (after 10 sec)

It hast the effect of a very big flutter, but when i switch back to the v4 Timecodeengine everything works fine again.

I'm using the FS open Soundcard. Clear sound ist off, safe mode & overclock ist activated.

What is the problem here? Please help me!!!
 

Posted Wed 11 Jun 08 @ 2:45 am
djcel wrote :
lhermot wrote :
hey i have just purchased the virtual vinyl box and i am the numark cue 5.0.7, when do u think the version 5.1 will be available for Cue?

Hi, please write your serial number in your profile.


any answer man? i am dying to see this new software update

and anyone verify the serato vinyls? want some color to my life ;)
 

Posted Wed 11 Jun 08 @ 9:56 am

Just got this from Numark:

It is currently in testing stages , talks are in progress to move it forward.

I cannot give an exact date at this time when it will be released but if testing goes well it should be soon it is important to us that the software performs optimally.
Kind Regards
__________________
Simon Bangs
Cue Product Specialist / Technical Service & Support
Numark Alesis Europe
 

Posted Thu 12 Jun 08 @ 6:39 pm
nice name..... I know the original stretch... I dont think your him... and for the new update.. I would have traded in the last 6 women I dated to have this 3 yrs ago...
 

Posted Thu 12 Jun 08 @ 11:39 pm
91%