hardware|numark VIRTUAL DJ SOFTWARE - Hardware Manuals - Numark - NS7 II - Setup

Hardware Manuals


Numark - NS7 II

SETUP


Firmware & Drivers


Windows & Mac
Install the latest drivers of the unit from http://www.numark.com/product/ns7ii

VirtualDJ 8 Setup


Download and install VirtualDJ 8 from http://www.virtualdj.com/download/index.html (in case you have not done already)

Once VirtualDJ 8 is opened, a Login Window will appear. Login with your Account credentials.

A Pro Infinity or a PLUS License is required to use the Numark NS7II. Without any of the above Licenses, the controller will operate for 10 minutes each time you restart VirtualDJ.
http://www.virtualdj.com/buy/index.html



A detection window will appear next verifying proper connection.

Click on the Use Soundcard in order VirtualDJ to apply the pre-defined audio setup with the built-in sound card of the NS7II (speakers need to be connected to the rear side of the unit in this case)

Click to OK



The unit is now ready to operate.


MIDI Operation


The unit should be visible in the CONTROLLERS tab of Config and the “factory default” available/selected from the Mappings drop-down list.
The factory default Mapping offers the functions described in this Manual, however those can be adjusted to your needs via VDJ Script actions.


Find more details at
http://www.virtualdj.com/wiki/VDJ8script.html


AUDIO Setup


The unit has a pre-defined Audio setup and a special button in the AUDIO tab of Config to provide that.



Alternative Audio setups can be applied in the same window (see Advanced Audio Setup).


For further software settings please refer to the User Guide of VirtualDJ 8.
http://www.virtualdj.com/manuals/virtualdj8/index.html
Layout