hardware|numark VIRTUAL DJ SOFTWARE - Hardware Manuals - Numark - NS7 II - Layout - Effects

Hardware Manuals


Numark - NS7 II - Layout

EFFECTS




  1. FX A/B Use these buttons to clone the effects from one deck to the other. E.g. pressing the FXA button on deck 4, it will clone the Effects from Deck 1 to Deck 4 and if SHIFT+FXB is pressed on deck 3, it will clone the Effects from Deck 4 to Deck 3.

  2. FX MASTER A/B. If FX MASTER A is enabled, the left FX unit (A) will control the Video Transition. If FX MASTER B is enabled, the right FX unit (B) will control the Master Video Effect.

  3. FX1 button
    Single FX Mode. Press this button to trigger the selected Effect. Hold SHIFT down and then press this button to control the Effect button 1 of the selected Effect (if the Effect offers one)

    Multi FX Mode. Press this button to trigger the selected Effect on FX Slot 1. Hold SHIFT down and then press this button to select the next Effect for FX Slot 1.
    Led will stay lit orange to indicate the Multi FX mode and will blink if the effect slot is activated.

    Master FXA/B Mode. If MASTER FXA is selected, the Left FX1 button will trigger the selected Video Transition. If MASTER FXB is selected, the Right FX1 button will trigger the selected Video Effect.

  4. FX2 button
    Single FX Mode. Press this button to select the previous Effect from the offered list. Hold SHIFT down and then press this button to control the Effect button 2 of the selected Effect (if the Effect offers one)

    Multi FX Mode. Press this button to trigger the selected Effect on FX Slot 2. Hold SHIFT down and then press this button to select the next Effect for FX Slot 2.
    Led will stay lit orange to indicate the Multi FX mode and will blink if the effect slot is activated.

    Master FXA/B Mode. If MASTER FXA is selected, the Left FX2 button will select the previous available Video Transition. If MASTER FXB is selected, the Right FX2 button will select the previous Video Effect.
    .
  5. FX3 button
    Single FX Mode. Press this button to select the next Effect from the offered list. Hold SHIFT down and then press this button to control the Effect button 3 of the selected Effect (if the Effect offers one)

    Multi FX Mode. Press this button to trigger the selected Effect on FX Slot 3. Hold SHIFT down and then press this button to select the next Effect for FX Slot 3.
    Led will stay lit orange to indicate the Multi FX mode and will blink if the effect slot is activated.

    Master FXA/B Mode. If MASTER FXA is selected, the Left FX2 button will select the next available Video Transition. If MASTER FXB is selected, the Right FX2 button will select the next Video Effect.

  6. FX1 KNOB.
    Single FX Mode. The knob controls the 1st parameter of the selected Effect. Hold SHIFT down and then use this knob to control the 4th parameter of the selected Effect.

    Multi-FX Mode: The knobs control the 1st parameter of the selected Effect on FX Slot 1. Hold SHIFT down and then use this knob to control the 2nd parameter of the selected Effect on FX Slot 1.

    Master FXA/B Mode. If MASTER FXA is selected, the knob on the left FX unit will control the 1st parameter of the selected Video Transition (if available).
    If MASTER FXB is selected, the knob on the right FX unit will control the 1st parameter of the selected Master Video Effect (if available)

    When FX Touch Mode (26) is activated, touch the FX 1 Knob to activate its assigned effect, and release the knob to deactivate it

  7. FX2 KNOB.
    Single FX Mode. The knob controls the 2nd parameter of the selected Effect. Hold SHIFT down and then use this knob to control the 5th parameter of the selected Effect.

    Multi-FX Mode: The knobs control the 1st parameter of the selected Effect on FX Slot 2. Hold SHIFT down and then use this knob to control the 2nd parameter of the selected Effect on FX Slot 2.

    Master FXA/B Mode. If MASTER FXA is selected, the knob on the left FX unit will control the 2nd parameter of the selected Video Transition (if available).
    If MASTER FXB is selected, the knob on the right FX unit will control the 2nd parameter of the selected Master Video Effect (if available)

    When FX Touch Mode (26) is activated, touch the FX 2 Knob to activate its assigned effect, and release the knob to deactivate it

  8. FX3 KNOB.
    Single FX Mode. The knob controls the 3rd parameter of the selected Effect. Hold SHIFT down and then use this knob to control the 6th parameter of the selected Effect.

    Multi-FX Mode: The knobs control the 1st parameter of the selected Effect on FX Slot 3. Hold SHIFT down and then use this knob to control the 2nd parameter of the selected Effect on FX Slot 3.

    Master FXA/B Mode. If MASTER FXA is selected, the knob on the left FX unit will control the 3rd parameter of the selected Video Transition (if available).
    If MASTER FXB is selected, the knob on the right FX unit will control the 3rd parameter of the selected Master Video Effect (if available)

    When FX Touch Mode (26) is activated, touch the FX 3 Knob to activate its assigned effect, and release the knob to deactivate it


  9. BEAT Encoder. This knob moves forward/backwards the track by 1 beat. While SHIFT is held down, the knob offers 10 times more accuracy (0.1 beat per step).
    Push the Encoder to display the FX GUI of the assigned Effect.

  10. BEAT Button. This button offers beat juggle (alternatively jumps one beat forward and backward). Hold SHIFT down and then press this button to toggle between the Single and Multi FX modes (the corresponding panels on the Default 4 Decks GUI of VirtualDJ will follow the selection).
Pads