Hardware Manuals


Pioneer DJ - DJM-S7 - Layout  

EFFECTS


The EFFECTS section of the DJM-S7 offers the ability to select between 3 modes, Hardware Effects, VirtualDJ Effects and Loop Midi.



HARDWARE & SOFTWARE EFFECTS


Hold SHIFT down and then press the ECHO [11] button to select the Hardware Effects mode and apply Pioneer Hardware Effects to the Decks. Use the 6 FX SELECT buttons to select one (or more, if pressed simultaneously) Pioneer Hardware Effect and then use the LOCK ON paddles to apply the Effect(s) to the Left/Right Deck.

Different Pioneer Effects can be assigned to the 6 FX SELECT buttons. See Preferences

Hold SHIFT down and then press the BACKSPIN [12] button to select the Software Effects mode to apply VirtualDJ Effects to the Decks. Use the 6 FX SELECT buttons to select one (or more, if pressed simultaneously) VirtualDJ Effect and then use the LOCK ON paddles to apply the Effect(s) to the Left/Right Deck.

The Effects assigned to the 6 FX Slots of VirtualDJ can be selected from the GUI.


VirtualDJ - 6 Fx Slots layout


KEY

ACTION

SHIFT (SECONDARY) ACTION

11 ECHO
Select the 1st Pioneer or VirtualDJ Effect
Select the Pioneer Hardware Effects mode
12 BACKSPIN
Select the 2nd Pioneer or VirtualDJ Effect
Select the VirtualDJ Software Effects mode
13 FLANGER
Select the 3rd Pioneer or VirtualDJ Effect
14 REVERB
Select the 4th Pioneer or VirtualDJ Effect
15 VINYL BRAKE
Select the 5th Pioneer or VirtualDJ Effect
Select the Effects Bank A
16 PHASER
Select the 6th Pioneer or VirtualDJ Effect
Select the Effects Bank B
17 PADDLE LOCK
Apply the selected Hardware or Software Effect to the assigned Left/Right deck.
18 FX LEVEL/DEPTH
Adjust the 1st Parameter of the selected Hardware or Software Effect
19 PARAMETER
Half/double the Beats for the selected Hardware or Software Effect (if available)
20 LCD
Displays the name of the selected Hardware/VirtualDJ Effect , its Beats value and the BPM of the Deck that is currently playing live (depends on the Volume and Crossfader positions).
21 TAP
Not assigned.
Cancel manual beat Tap and return to BPM sent from VirtualDJ



LOOP MIDI MODE


In Loop MIDI modes the DJM-S7 repeatedly sends MIDI message to VirtualDJ Pro at a set beat value interval (based on the Deck's BPM, which allows you to trigger varying functions by simply pulling the FX LOCK ON paddles.
Two sets of pre configured Loop MIDI functions are available via the Loop MIDI 1 & Loop MIDI 2 modes, which can be accessed by holding SHIFT and pressing the FLANGER or REVERB FX select buttons

Press the FX Select button [11] to [16] to choose a Loop MIDI function as per the table below.
Toggle the FX paddle [17] to the ON or LOCK ON position to trigger the specified Loop MIDI function.
Use the FX Parameter left & right buttons [19] to adjust the timing of the MIDI interval.

KEY

LOOP MIDI 1 ACTION

SHIFT (SECONDARY) ACTION

11 ECHO
Trigger VirtualDJ Sampler Slot 1
Stop Sampler Slot 1
12 BACKSPIN
Trigger VirtualDJ Sampler Slot 2
Stop Sampler Slot 2
13 FLANGER
Trigger VirtualDJ Sampler Slot 3
Stop Sampler Slot 3
14 REVERB
Trigger HotCue 1
Delete HotCue 1
15 VINYL bRAKE
Trigger HotCue 2
Delete HotCue 2
16 PHASER
Trigger HotCue 3
Delete HotCue 3



KEY

LOOP MIDI 2 ACTION

SHIFT (SECONDARY) ACTION

11 ECHO
Move Deck's Key down by 1 semitone
12 BACKSPIN
Move Deck's Key up by 1 semitone
Unassigned
13 FLANGER
Match Deck's Key to the value of the other Deck
Unassigned
14 REVERB
Plays Deck backwards while pressed. Upon release Deck will resume playing from the position it would have been if never triggered (Censor)
Unassigned
15 VINYL BRAKE
Unassigned
Unassigned
16 PHASER
Mutes Deck while pressed, creating a Cut Effect
Unassigned


Equalizer