hardware|numark VIRTUAL DJ SOFTWARE - Hardware Manuals - Numark - Mixtrack Quad - Layout - Effects

Hardware Manuals


Numark - Mixtrack Quad - Layout

EFFECTS & UPPER PADS


The upper 4 PADs (24) of the Mixtrack Quad offer multi-slot Effect controls but also offer Quick Loop and Loop Rolls functions depending on the SHIFT button and the Slip mode.

Effects & Filter


  1. FX ENC
    FX1 Enc. Use this encoder to control the 1st parameter of the selected Effect on FX Slot 1. Hold SHIFT down and then use this knob to select the Effect on FX Slot 1.

    FX2 Enc. Use this encoder to control the 1st parameter of the selected Effect on FX Slot 2. Hold SHIFT down and then use this knob to select the Effect on FX Slot 2.

    FX3 Enc. Use this encoder to control the 1st parameter of the selected Effect on FX Slot 3. Hold SHIFT down and then use this knob to select the Effect on FX Slot 3.



Multi FX - VirtualDJ 4 Decks skin
  1. FX ON
    FX1 ON: Press this button to trigger the selected Effect on FX Slot 1.

    FX2 ON: Press this button to trigger the selected Effect on FX Slot 2.

    FX3 ON: Press this button to trigger the selected Effect on FX Slot 3.

  2. FILTER. Use this encoder to apply a resonance Filter on the left and right selected software decks.

  3. FILTER RESET. Press this PAD to reset the value of the Filter for the left or right selected decks to zero (off) position. The LED of the PAD will lit if a Filter is applying.


Quick Loops


Press and hold SHIFT (18) down and then use the 4 upper PADs (24) to trigger a Loop of different beats size (1, 2, 4 and 16 beats) as per the image.

When SHIFT is pressed, the leds of the PADs will change color to indicate the different functionality.


Loop Rolls


When Slip mode is enabled (SHIFT action of button 16), use the 4 upper PADs (24) to trigger a Loop Roll of a different size (1/8, ¼, ½ and 1 beats) as per the image.
Once the triggered loop is disabled (using the same pads), the track will resume to the point it would have been if the loop was never enabled.

When Slip mode is enabled, the leds of the PADs will change color to indicate the different functionality.

Pads