hardware|numark VIRTUAL DJ SOFTWARE - Hardware Manuals - Numark - Mixdeck Quad - Mixer Controls

Hardware Manuals


Numark - Mixdeck Quad

MIXER CONTROLS






KEY

ACTION

1 CROSSFADER
Blends audio signals from left and right assigned mixer channels
2 VOLUME
Adjust Volume Output of each mixer channel
3 CF ASSIGN
Select if a mixer channel will be assigned on the left (A position) or right (B position) side of the crossfader or its output will not be affected by the crossfader position (THRU position)
4 CUE/PFL
Send the audio signal of a Mixer Channel to the Headphones Channel
5 EQ BASS
Adjust the Equalizer Low Band frequencies (Bass) of each mixer channel
6 EQ MID
Adjust the Equalizer Middle Band frequencies of each mixer channel
7 EQ HIGH
Adjust the Equalizer High Band frequencies (Treble) of each mixer channel
8 GAIN
Adjust the pre-fader Output level (Gain) of each mixer channel
9 CH SOURCE
Select the Source of each mixer channel. Set to USB MIDI position to select and control a VirtualDJ deck from a mixer channel
10 CUE MIX
Blends audio signal in Headphones Channel between the Master Output (when in maximum position) and the channels that have PFL/CUE enabled
11 CUE GAIN
Adjust the Output Level of the Headphones Channel
12 BOOTH VOL
Adjust the Level of the Booth Output
13 MASTER VOL
Adjust the Level of the Master Output



Deck Controls