VDJPedia



 DJIO

Last edit by Dj-J3fff, Limited edition user on Tue 04 Jun 13 @ 10:52 pm

Download and install the latest drivers from http://www.numark.com/djio


Internal software mixer configuration

If you will be using the internal software mixer of VirtualDJ, then go to CONFIG -> Sound Setup and choose the following:

PC:

Inputs: None
Outputs: Headphones (Channels 1/2 main 3/4 headphones)
Sound card: ASIO -> Numark USB
Don't forget to tick on the "ultra latency" box!


Mac:

Inputs: None
Outputs: Headphones (Channels 1/2 main 3/4 headphones)
Sound card: 4.1 card -> Numark

Click APPLY.

Plug a pair of amplified stereo speakers into OUTPUT 1 on the back of the DJIO and your headphones into the headphone socket of the DJIO.


External hardware audio DJ mixer

If you are using an external hardware audio DJ mixer and wish to output the left and right decks to two channels of the mixer, configure your sound settings as follows:

PC:

Inputs: None
Outputs: External Mixer
Sound card: ASIO -> Numark USB

Mac:

Inputs: None
Outputs: External Mixer
Sound card: 4.1 card -> Numark

Connect OUTPUT 1 to line input 1 of your external DJ mixer. Connect OUTPUT 2 to line input 2.

Plug your headphones into your external mixer and then use the channel CUE/PFL buttons to select which channels to pre-listen to.

NOTE: External mixer setup is only possible in VirtualDJ Pro Basic and the full VirtualDJ Professional: http://www.virtualdj.com/products/comparison.html


Return to Controller Config & Troubleshooting...