hardware|reloop VIRTUAL DJ SOFTWARE - Hardware Manuals - Reloop - MIXON4 - Layout - Mixer & Browser

Hardware Manuals


Reloop - MIXON4 - Layout

MIXER & BROWSER Controls



  1. CROSSFADER. Blends audio between the channels assigned to the left and right side of the crossfader.

  2. CF CURVE. Use this switch to select one of the 3 available Crossfader curves (Full, Smooth and Scratch)

  3. CF ASSIGN. Set a mixer channel as Left (A position), Right (B position) or Thru. When in THRU position, the crossfader will not affect the output level of the channel. When in A/B position, the output of the channel will be maximum at left/right crossfader position and its output level will be blend with the audio signal of the Right/Left assigned decks depending on the crossfader position and the selected crossfader curve.

  4. VOLUME. Adjust the Volume of each channel.

    Hold SHIFT down and then use use these faders to adjust the Volume of each channel and at the same time stop the deck to the last Cue position, when the fader is at the minimum position and start the deck when the fader moves from the minimum position to any other. (Fader Start/Stop)

  5. PFL/CUE. Press these buttons to send the audio signal from a mixer channel to the Headphones Output channel.

    Hold SHIFT down and then use these buttons to assign a deck as Left/Right side of the Video crossfader. Hold SHIFT down and then use the same buttons to turn off all Video Crossfader Assign buttons and return to the manual assignment (VirtualDJ will automatically assign as left and right sides of the Video crossfader, the Left and Right assigned Decks)

  6. LOAD. Press these buttons to load the selected track from the Browser to decks 1 to 4. The LED of the button will be on if the deck is loaded.

    Hold SHIFT down and then press the LOAD button on Channel 3 to load the selected track to the Automix List.
    Hold SHIFT down and then press the LOAD button on Channel 1 to open/close Sideview Browser window.
    Hold SHIFT down and then press the LOAD button on Channel 2 to cycle through the available Mixer panels (Audio, Video, Scratch and Master).
    Hold SHIFT down and then press the LOAD button on Channel 4 to cycle through the available Sideview windows (Automix, Sidelist, Karaoke, Sampler and Clones).

  7. FILTER. Use this knob to apply a High/Low Pass Filter to the deck. In middle position no filter is applied.

    The knob is also offering 2 additional Filter FX modes.
    Mode 1: Use the M button to enable disable Filter FX Mode 1. In this mode the Filter knob will also trigger the selected Effect in FX Slot 1 when not in the middle position.

    Mode 2. Hold SHIFT and then use the M button to enable/disable Filter FX Mode 2. In this mode the Filter knob will trigger the selected Effect in FX Slot 1 when the knob is not at the middle position, and at the same time it will control the 1st parameter of the selected Effect.

    When any of the Filter FX modes is enabled, hold SHIFT and then use the knob to only apply a High/Low pass Filter without triggering the selected Effect.

  8. EQ LOW. Adjust the Low (Bass) frequencies for each mixer channel.

  9. EQ MID. Adjust the Mid frequencies for each mixer channel.

  10. EQ HIGH. Adjust the High (Treble) frequencies for each mixer channel.

  11. GAIN. Adjust the Gain of each mixer channel.

  12. MASTER VOLUME. Adjust the level of the Master Output. Hardware operation - movement not visible on the VirtualDJ GUI

  13. BOOTH VOLUME. Adjust the level of the Booth Output. Hardware operation – movement not visible on the VirtualDJ GUI.

  14. HEAPHONES VOLUME. Adjust the Volume Output of the Headphones Channel.

  15. HEADPHONES MIX. Adjust how the Channels and the Master Output blend at the Headphones Channel.

  16. SAMPLER VOLUME. Adjust the Master Output Volume of the VirtualDJ Sampler

  17. BROWSE ENC. Scroll through files of folders. Push the encoder to toggle focus between the Folders and the Songs Lists.

    Hold SHIFT down and then use the encoder to scroll faster (+/- 15 tracks or folders per click)
    Hold SHIFT down and then push the encoder to toggle between the normal and zoomed Browser view

  18. BACK. Use this button to set focus to the Folders List. If focus is already to the Folders List, use this button to open/close sub-folders.
    Hold SHIFT down and then use this button to cycle focus between the available Browser windows (Folders, Songs and Sideview).

Deck Controls