hardware|pioneer VIRTUAL DJ SOFTWARE - Hardware Manuals - Pioneer - DDJ-SR2 - Other Settings

Hardware Manuals


Pioneer - DDJ-SR2

OTHER SETTINGS


The DDJ-SR2 offers firmware Settings via UTILITIES mode, such as Jog illumination and Fader Start modes. Read DDJ-SR2 Manual for further details.

JOG ILLUMINATION


The LED ring of the DDJ-SR2 can operate in 3 different modes, offering useful information while mixing.

How to select the Jog Illumination Mode:
  • While the DDJ-SR2 is powered off, hold both left SYNC and left PLAY buttons and then power on the unit.
  • Release SYNC and PLAY buttons
  • Use the FX1 ON, FX2 ON or FX3 ON buttons on the right FX unit to select one of the 3 available modes for the Jog Illumination
    • When FX1 ON is turned on (default mode):
      - The Jog Ring will be lit in red when DECK 1 or DECK 2 is selected from the mixer SOURCE select switches.
      - The Jog Ring will be lit in amber when DECK 3 or DECK 4 is selected from the mixer SOURCE select switches
      - The Jog Ring will be off when PHONO/LINE is selected from the mixer SOURCE select switches.
    • When FX2 ON is turned on:
      - The Jog Ring will be lit in blue when the VINYL mode is enabled on the selected Deck.
      - The Jog Ring will be off when the VINYL mode is disabled on the selected Deck.
    • When FX3 ON is turned on:
      - The Jog Ring will be lit with the assigned color of the loaded track.
      - The Jog Ring will be off if no color is assigned (default) to the loaded track.
      - In this mode, the color of the Jog ring can be customized via VDJ script actions assigned to the LED_JOG key

  • Power off the DDJ-SR2 to save your selection.



FADER START/STOP/SYNC


The DDJ-SR2 offers the ability to enable/disable the Fader Start/Stop/Sync functionality when SHIFT is pressed and the VOLUME faders are moved from minimum to other position or vice versa.

How to select the SHIFT+Volume Fader Mode:
  • While the DDJ-SR2 is powered off, hold both left SYNC and left PLAY buttons and then power on the unit.
  • Release SYNC and PLAY buttons
  • Use the FX1 ON, FX2 ON or FX3 ON buttons on the left FX unit to select one of the 3 available modes for the SHIFT+Volume Faders
    • When FX1 ON is turned on (default):
      - Fader Start/Stop functionality is enabled, along with the Sync mode. When SHIFT+Volume fader is moved from the minimum position to any other, the Deck will start playing and will be also synced to the opposite/master deck. When SHIFT+Volume is moved to the minimum position, the Deck will stop at the CUE position.
    • When FX1 ON is turned on:
      - Fader Start/Stop functionality is enabled, but without the Sync mode. When SHIFT+Volume fader is moved from the minimum position to any other, the Deck will start playing but will not be synced to the opposite/master deck. When SHIFT+Volume is moved to the minimum position, the Deck will stop at the CUE position.
    • When FX3 ON is turned on:
      - Fader Start/Stop functionality is disabled. When SHIFT+Volume fader is moved, no additional functionality will apply.

  • Power off the DDJ-SR2 to save your selection.





For further Technical features and specifications, visit

Pioneer DDJ-SR2
Product's Page







Hardware Integration Department
2017 - ATOMIX PRODUCTIONS



Reproduction of this manual in full or in part without written permission from Atomix Productions is prohibited.