Hardware Manuals


Denon DJ - MC-3000  

FRONT & REAR PANELS




Denon DJ MC-3000 Rear Panel


Denon DJ MC-3000 Front Panel


DESCRIPTION

43 POWER
Connect the provided AC/DC Power Adapter and power on the unit after all the In/Out connections are made
44 USB
Connect this port with a USB port of your computer using the provided cable
45 MASTER OUT (TRS)
Balanced Master Output. Connect your amplified speakers using proper TRS 1/4" cables. The Level of this output is controlled from the top panel of the unit
46 MASTER OUT (RCA)
Un-balanced Master Output. Connect your amplified speakers using proper RCA cables. The Level of this output is controlled from the top panel of the unit
47 LINE IN 1/2
Connect your analogue media sources such as CD Players, MP3 Players etc. The Volume and Panning between these 2 Inputs are controlled from the top panel of the unit.
Even though the Inputs are directly routed to the Master Ouput, those are also part of the USB Audio Interface so can be included in the Audio setup and used as Line Ins and recorded as well
48 MIC INPUT
Connect a Microphone using a 1/4" cable/adapter. The audio signal of this Input is directly routed to the Master Output (not offered in the USB Audio Interface so cannot be included in the Audio Setup nor can be recorded)
49 PHONES SOCKET
Connect your Headphones using a 1/4" cable/adapter. The Output Level of this Output is controlled from the top panel of the unit





For further Technical features and specifications, visit

Denon MC-3000
Product's Page





Hardware Integration Department
2016 - ATOMIX PRODUCTIONS



Reproduction of this manual in full or in part without written permission from Atomix Productions is prohibited.