VDJPedia



 XDJ-R1

Install the latest drivers (PC only) and firmware (Mac & PC) from Pioneer website: http://pioneerdj.com/support/product.php?lang=en&p=XDJ-R1&t=250

The mixer part of Pioneer XDJ-R1 can be configured and work in 2 modes, software (PC mode) and hardware (XDJ-R1 mode).


XDJ-R1 mode (hardware)
In this mode, the sound is mixed using this unit's hardware mixer and the software mixer of VirtualDJ is not used. Virtualdj can be operated using this unit's player section.


To change the mixer mode to XDJ-R1 ...

  • Press the [INFO(UTILITY)] button for more than 1 second. The [UTILITY] screen is displayed
  • Turn the rotary selector, select [MIXER MODE], then press the rotary selector
  • Turn the rotary selector , select the mode [XDJ-R1], then press the rotary selector.


Set your sound settings in CONFIG -> Sound Setup to the following:

Inputs: None
Outputs: External Mixer
Sound card (PC): ASIO - Pioneer XDJ_R1 ASIO (from the drop-down menu)
Sound card (Mac): 4-out card - Pioneer XDJ_R1 (from the drop-down menu)

Click Apply




PC mode (software)
The sound is mixed using the internal mixer of Virtualdj

To change the mixer mode to PC ...

  • PRESS THE [INFO(UTILITY)] button for more than 1 second. The [UTILITY] screen is displayed
  • Turn the rotary selector, select [MIXER MODE], then press the rotary selector
  • Turn the rotary selector , select the mode [PC], then press the rotary selector.

Set your sound settings in CONFIG -> Sound Setup to the following:

Inputs: None
Ouputs: Headphones (Master: Chan 1&2 / Headphones: Chan 3&4)
Sound card (PC): ASIO - Pioneer XDJ_R1 ASIO (from the drop-down menu)
Sound card (Mac): 4-out card - Pioneer XDJ_R1 (from the drop-down menu)

Click APPLY.


Note !! Users of Limited Edition need to operate the unit to the PC (software) mode

The MIC is hardware and cannot be controlled by the software nor can be recorded.

Return to Controller Config & Troubleshooting...