VDJPedia



 MixDeck Quad

Make sure that the USB Audio switch on the back of the MixDeck Quad is set to PRG/CUE.

Set all of the mixer channel source selection switches to USB/MIDI.


In VirtualDJ, go to CONFIG -> Sound Setup and set you sound configuration to the following:


PC:

Inputs: None
Outputs: Headphones (Master: Chan 1&2 / Headphones: Chan 3&4)
Sound card: 4.1 card -> Choose the MixDeck Quad from the list

Click APPLY


Mac:

Inputs: None
Outputs: Headphones (Master: Chan 1&2 / Headphones: Chan 3&4)
Sound card: 4 out card -> Choose the MixDeck Quad from the list

Click APPLY


Troubleshooting:
In case a lag is noticed on the Leds and LCD Display with version 8, set a higher value for the ControllerRefreshrate in config->Options (in Advanced Options) e.g. to 30 or even 50.
You will then may not have a very smooth performance for the LEDs of the Jogwheel ring, but no lag will be noticed for the other Leds and LCD displays.
It appears that the unit cannot handle too much date in a short period of time.



Return to Controller Config & Troubleshooting...