With the EFFECTS section of the DJM-S5 you can apply software VirtualDJ Effects, select an Effects Bank, apply a Scratch Cutter Pattern, choose a Crossfader Curve etc
The Effects assigned to the 6 FX Slots of VirtualDJ can be selected from the GUI.
SHIFT (SECONDARY) ACTION
Multiple Effects can be selected and applied when more than 1 FX|CUT button are pressed
Press and hold one of the 6 FX | CUT buttons for more than 1 second to enable the Scratch Cutter mode and select one of the 6 pre-defined patterns. The led of the selected Scratch Cutter will be lit solid, while all other 5 buttons will be turned off.
While Scratch Cutter mode is enabled, use the 6 FX | CUT buttons to select a different pattern.
To disable the Scratch Cutter mode, press and hold any of the 6 FX | CUT buttons.
Apply the selected Scratch Cutter pattern to Left/Right Deck by turning on the Left/Right LEVER paddle.
Start scratching - moving the platter back and forth on beat (or other timing). For some patterns, you can select the BEAT < for double speed or BEAT > for normal speed.
The Scratch Cutter patterns can be applied using any controller with touch-sensitive jogwheels or DVS (Timecode Vinyl/CD).
While Scratch Cutter mode is selected, you can also apply VirtualDJ Effects by holding MODE button and selecting a FX Slot with the FX | CUT buttons.