Sign In:     

Forum: VirtualDJ Technical Support

Topic: Reloop Rmx-90 not recording the master of the mixer

This topic is old and might contain outdated or incorrect information.

Hi Djs!

I tryed to find a topic about it without luck.

I followed the manual, but failed. I want to record both what I play in VDJ and also what is playing on my turntable.

So far only what is playing from my TT is recording.

Anyone had succes with this and would share their audio setting and knowledge?

thank you!
 
Posted Sun 30 Jun 19 @ 11:04 pm
If I understand correctly, you are using an external mixer with VDJ and at least one turntable. You want to play music using VDJ and also by using your turntable(s) in the traditional sense (that is, not using timecode). You want to record both the VDJ output and the turntable(s).

There isn’t one answer here - it depends on what mixer you are using and how you are using it. For example, you might use a mixer/controller which would allow two channels to be software mixed (by VDJ) plus two more hardware channels. Or all hardware.

In either case, you need to route the output of the hardware mixer back into VDJ. You may need a separate audio interface to do that and set up another input in VDJ for recording. Or you could use a hardware recorder. Or another computer.

Does that make any sense?
 
 
I firgured it out. I was in the internal setting of the Reloop Rmx-90 I had to assign what I send to record. Thanks!
 


(Old topics and forums are automatically closed)