4out mode & Audio Setup
The VMS5 offers a pre-defined audio configuration for the 8out mode, however if the 4out mode is selected from the front switcher (mainly for Timecode use), the audio needs to be manually configured as the Midilogs are not automatically assigned properly.
Go to the AUDIO tab of Config and change the decks order at the Source column as per the following images:
In the next Chapters will be explained how to properly assign Midilogs to software decks (routing), change the EQ mode, how to record/broadcast your mix and how to setup and use Timecode system (DVS)
Midilogs & Routing