NUMARK IDJ3





for VirtualDJ 8.0
Last Update : July 2016
 

SETUP


Step 1. Connections


Connect the iDJ3 with your computer using the provided USB cable.
Connect your speakers to the rear Master Output using proper RCA cables and your Headphones to the front socket.

Step 2. Drivers


Install the required drivers from http://www.numark.com/product/idj3
Available for both Windows and Mac

Step 3. VirtualDJ


Install VirtualDJ 8 from http://www.virtualdj.com/download/index.html (in case you have not done already)

Start VirtualDJ and login with your Account credentials.

A Pro Infinity, Pro Subscription or Plus iDJ3 Controller License is required. http://www.virtualdj.com/buy/index.html

Detection Window
A detection window will appear when the unit is first connected with VirtualDJ.

Click on the "Use Soundcard" button so that VirtualDJ will apply the pre-defined audio configuration (speakers need to be connected to the Master Output of the unit)

Click to OK



The iDJ3 is now ready to operate with VirtualDJ
 

CONTROLS






KEY

ACTION

1 CROSSFADER
Blends audio signals from left and right decks
2 VOLUME
Adjust Volume Output for Left and Right deck
3 POD VOLUME
Adjust the Output Volume of the iPod Audio Input
4 CUE/PFL
Send audio signal from Left and Right decks to the Headphones channel
5 CUE SOURCE SELECTOR
Select the Input that will be routed to the Headphones Channel. Select A/B for software decks (depends on the PFL/CUE buttons), Master to preview Master Output or iPod to preview the iPod Source
6 BROWSE
Scroll through folders or tracks. When focus is in Folders, set focus in Songs List. When focus is in Songs list, load track to the selected deck
7 LOAD
Load selected track on Left or Right deck
9 MASTER VOL
Adjust Master Output Level
9 CUE VOL
Adjust Output Level of the Headphones Channel
10 SYNC
Match BPM and Phase with the opposite deck
11 CUE
Set a Temporary Cue when paused. Jump to CUE when playing and preview track while pressed
12 PLAY
Play/pause track
13 STUTTER
Play-stutter track
14 SCRATCH
Toggle between Scratch (Vinyl) mode and Bend (CD) mode for the jogwheel
15 JOG
Touch-sensitive jogwheel for scratch or bending, depending on the Vinyl (Scratch) mode
16 REVERSE
Play track in reverse
17 PITCH
Adjust track's tempo
18 PITCH BEND
Temporary slow-down/speed-up track. Tempo will return to the value designated by the Pitch fader once the buttons are released.
19 LOOP 1
Trigger a 1 beat auto-loop.
20 LOOP 2
Trigger a 2 beats auto-loop.
21 LOOP 4
Trigger a 4 beats auto-loop.
22 LOOP 8
Trigger a 8 beats auto-loop.
23 EQ KILL ALL
Kill all 3 Equalizer Bands
24 EQ KILL LOW
Kill Low Equalizer Band
25 EQ KILL MID
Kill Middle Equalizer Band
26 EQ KILL HIGH
Kill High Equalizer Band
27 KEYLOCK
Lock Key (Master Tempo)
28 EQ LOW
Adjust Equalizer Low (Bass) frequencies
29 EQ MID
Adjust Equalizee Mid (Middle) frequencies
30 EQ HIGH
Adjust Equalizer High (Treble) frequencies)





For further Technical features and specifications, visit

Numark iDJ3
Product's Page






Hardware Integration Department
2016 - ATOMIX PRODUCTIONS



Reproduction of this manual in full or in part without written permission from Atomix Productions is prohibited.