 |
If you would like to speak to technical support directly regarding your issue please contact us or post here. FORUM http://getsatisfaction.com/numark/ Numark Technical Support USA Phone: 401-658-3131 (Mon. - Fri. 8:30am - 4:30pm, EST) Email support: support@numark.com United Kingdom Phone: +44 1252 353850 (Mon. - Fri. 9am - 6pm, GMT) Email support: uksupport@numark.com Europe Phone: +49 369 29657906 (Mon. - Fri. 9:00 - 13:00 and 14:00 - 17:00, CET) Email support: support@numark.de |
Sat 29 Aug 09 @ 4:55 pm
RECOMMENDED SYSTEM REQUIREMENTS:
Mac
Core Duo 1.8GHz processor or better
2 GB RAM
OS 10.4.11 or higher
USB 2.0 port
Windows XP
Core Duo 1.8GHz processor or better
2GB RAM
Service Pack 2 or higher
USB 2.0 port
Windows Vista
Core Duo 1.8GHz processor or better
2 GB RAM
Service Pack 1 or higher
USB 2.0 port
IMPORTANT: DRIVER INSTALLATION
Before using the NS7 with Numark Cue, you must install the NS7 driver.
Windows:
If you have not already installed ITCH you must install the driver separately.
You can download the latest version of the NS7 driver from HYPERLINK "http://www.numark.com/ns7" http://www.numark.com/ns7
Mac:
To enable your computer to communicate with the NS7 you must first Install the latest build of Itch, this will also install the NS7 midi drivers.
You can download the latest version of Itch from
http://www.serato.com/downloads/itch
STEP 1: SOUND SETUP
Windows:
On the sound options tab please choose the following options:
[Configuration > Sound Setup]
Inputs : None
Outputs : Headphones
Card : Asio
Driver : Numark USB Audio Device
Channels 1/2 main 3/4 Headphones
Press APPLY.
Mac:
On the sound options tab please choose the following options:
[Configuration > Sound Setup]
Inputs : None
Outputs : Headphones
Card : 4/4 Card
Driver : Numark USB Audio Device
Channels 1/2 main 3/4 Headphones
Press APPLY.
STEP 2: PERFORMANCE SETTINGS
This step is important for both PC and MAC users.
The performance slider allows a user to set the resources made available to Cue.
Please go to the performance tab [Configuration > Performances]
Please set latency to “Auto” and ensure that “Safemode” and “Overclock” are unticked.
Set the performance slider halfway between “Fastest” and “Best”
Now proceed to test the unit, if you find your system is performing well increase the slider one step towards “Best”
Now retest with the new setting if the unit performs well move the slider closer to “Best” Repeat this until you reach “Best” or you notice performance issues. If you notice a performance issue move the slider back to the last position.
