www.komusicvideo.com

Sun 29 Aug 10 @ 12:55 am

TO ALL PRO MEMBERS, IF YOU UPGRADED LIKE ME TO THE LATEST RELEASE, AND YOU ARE HAVING PROBLEMS WITH THE AISO DRIVER
FOR VIRTUAL DJ PRO 6.0 AND UP TO 6.1.2

THE PROBLEM IS IN WINDOWS IF YOU OPEN CONTROL PANEL FOR HERCULES DJ COUNCEL RMX, AND SEE "AUDIO SETUP" SHOULD BE SET FOR AISO, NOT WDM. THE REASON THIS HAPPENS, IS BECAUSE BY DEFAULT WHEN YOU BOOT YOUR COMPUTER WITH THE HERCULES CONNECTED TO USB, OR YOU JUST PLUG IN THE HERCULES TO BE THE DEFAULT AUDIO DEVICE, OR SOUND CARD, THIS WILL TAKE OVER ALL SOUNDS INCLUDING WINDOWS MEDIA DEFAULT SOUNDS. SO BY DEFAULT WINDOWS ASSIGHNS THE WINDOWS MEDIA DRIVER TO RUN THE HERCULES WHEN NO PROGRAMS THAT REQUIE AISO ARE NOT IN USE, SO THE CONTROL PANEL FOR HERCULES WILL BE RUNNING IN WDM MODE. TO CORRECT THIS I ALWAYS START TO CHECK CONTROL PANEL 1ST, AND MAKE SURE ITS SET FOR AISO BEFORE LAUNCHING VIRTUAL DJ, THEN IF YOU HAVE AUDIO OUTPUT PROBLEM, OR MAPPING PROBLEMS, GO TO SOUND SETUP TAB IN VIRTUAL DJ AND SET THE INPUT TO NONE. OUTPUT SHOULD BE SET LABTOP, HEADPHONES, SINGLE SPEAKER CONFIGURATION.
MASTER SHOULD BE SET TO 1&2 CHANNEL, AND HEADPHONES SHOULD BE SET TO 3&4 CHANNEL.
SOUND CARD SHOULD BE SET TO AISO DRIVER, AND AISO CONFIG SHOULD BE SET TO HERCULES DJ COUNCEL RMX.

THE EARLIER VERSIONS OF VIRTUAL DJ I REMEBER USED TO LET ME RUN VIRTUAL DJ IN WDM MODE, BUT I GUESS THAT DOES NOT WORK IN VISTA, OR IN THE 6.0-6.1.2 VERSIONS OF VDJ PRO.

I HOPE THIS HELPS PRO MEMBERS WITH THIS PROBLEM

THANK YOU
DJ IMAXX

I CALLED TECH SUPPMRT @ HERCULES, AND THEY WAS VERY HELPFULL