bproctor
I've got a 10" mixer and I would like to put it into a rack, does anyone know where I could find mounting brackets for this? Or maybe a case with the top made for a 10" mixer and the bottom for 19" rack equipment? I've searched all over the internet and haven't been able to come up with anything.
Thanks,
Brad
Thanks,
Brad
Posted Fri 15 Mar 02 @ 8:50 am
Hey there Brad . Mysielf I use a fair amount of 19" rack gear as well as the occasional 22" . What i have found is that many things have to be custom fabricated. What i would reccomend getting either a 1/8" X 19" X 12.25" thick piece of aluminum or a blank relay pannel 7U tall. The dementions are the same but the relay pannel will have mounting slots. Then determin the mounting hole size. You can have a laser cuting company cut a exact hole, or drill the corrners and use a jig saw. you will probably need to renforce the plate and add aditional hardware. If you want a long lasting finish have the plate powder coated. There is my 2 bits, or more thought of what to do. Good luck Jason S.
Posted Fri 15 Mar 02 @ 7:12 pm