Quick Sign In:  

Forum: Old versions

Topic: Hercules RMX: Fader not working.

This topic is old and might contain outdated or incorrect information.

xcakidPRO InfinityMember since 2010
Can someone help me out here please.

First the gear:

Macbook Pro 17"
Virtual DJ Pro 6.1
Hercules RMX

The Problem:

The fader does not work. I have been able to download the Mac driver from the Hercules website. And everything is working. The fader however, might as well not be there. I see it moving on VDJ, but it does not do anything. Both deck plays out of the main. In order to mix I use the volume control for each line. Have tried various configs including external mixer setting. Nothing seems to work. Any assistance would be greatly appreciated.
 

Posted Mon 06 Dec 10 @ 9:38 pm
DJ PhatsoPRO InfinityHercules Support TeamMember since 2005
For Sound Setup, configure as follow:

- Input : None

- Output(s): Headphone > Master Chan1/2 / headphone Chan3/4

-Soundcard: DJ Console Rmx

This is the basic audio configuration. Your main mix comes out of Output 1/2 and preview from the headphone (same signal as Output 3/4).
 

Posted Tue 07 Dec 10 @ 6:22 am
xcakidPRO InfinityMember since 2010
DJ Phatso wrote :
For Sound Setup, configure as follow:

- Input : None

- Output(s): Headphone > Master Chan1/2 / headphone Chan3/4

-Soundcard: DJ Console Rmx

This is the basic audio configuration. Your main mix comes out of Output 1/2 and preview from the headphone (same signal as Output 3/4).


DJ Phatso, thank you for the response.

That is how I have it configured. Yet, when I put the fader to deck a, you still hear deck b and vice versa. Maybe I got a bum unit?
 

Posted Tue 07 Dec 10 @ 7:49 am
DJ PhatsoPRO InfinityHercules Support TeamMember since 2005
This is what you hear from your speakers (connected to Output 1/2 of the Rmx) or your headphone ?

If from the headphone, be sure that the Monitor knob is in the Cue position.
 

Posted Tue 07 Dec 10 @ 12:09 pm
xcakidPRO InfinityMember since 2010
DJ Phatso wrote :
This is what you hear from your speakers (connected to Output 1/2 of the Rmx) or your headphone ?

If from the headphone, be sure that the Monitor knob is in the Cue position.


The headphone and cueiing is fine. I hear through headphone what I have as PFL and can manipulate volume and cue as normal

It's the cross fader that seem to not be working. When I have the cross fader to deck a, I can hear deck b out of the main (speakers) also and vice versa. It's as if the fader is dead center even though its not.


 

Posted Tue 07 Dec 10 @ 12:59 pm
DJ PhatsoPRO InfinityHercules Support TeamMember since 2005
Maybe the configuration related to the crossfader is wrong. Have you tried doing a reset of the controller mapping in the Mapper tab of the VDJ configuration ?

Otherwise, let's also make sure it,s not a hardware problem. Make sure the crossfader is working properly outside of VDJ using this procedure:

http://ts.hercules.com/faqs/eng/her_eng_00352.pdf
 

Posted Tue 07 Dec 10 @ 1:58 pm
AsTheDJPRO InfinityMember since 2008
Make Sure It Not Disabled In The Options Setting.
 

Posted Tue 07 Dec 10 @ 7:29 pm
xcakidPRO InfinityMember since 2010
asthedj wrote :
Make Sure It Not Disabled In The Options Setting.


Well crap, I knew it was something simple I was overlooking. That was the problem.

Thanks guys. I appreciate the help and hope I can return the favor someday.
 

Posted Tue 07 Dec 10 @ 10:38 pm
wasteHome userMember since 2008
For Sound Setup, configure as follow:

- Input : None

- Output(s): Headphone > Master Chan1/2 / headphone Chan3/4

-Soundcard: DJ Console Rmx

This is the basic audio configuration. Your main mix comes out of Output 1/2 and preview from the headphone (same signal as Output 3/4).

This is exactly my set up in VDJ
Now I want to pre listen on my RMX and have the main sound on my Imac.
Headphones pre listen won't work, tried everything.

Cue select is on Blue on the deck I want to pre-listen from.
 

Posted Mon 14 Mar 11 @ 2:27 pm
My crossfader is doing weird things, it keeps on moving from the left to the right about 1cm and when i put it in the middle on my hercules dj control instinct it displays it way more to the left
Please help!!
 

Posted Sat 13 Sep 14 @ 10:34 am
DJ PhatsoPRO InfinityHercules Support TeamMember since 2005
 

Posted Mon 15 Sep 14 @ 7:38 am


(Old topics and forums are automatically closed)